The Gewindequick is ready for use in no time at all. After entering the torque, speed and desired thread depth, you can cut threads of any type – including fine threads or UNC/UNF threads.
The tap pulls itself into the workpiece to be machined. This is made possible by a weight balancing system, which holds the drive spindle as if in a state of suspense during machining.
The depth of the tool is continuously monitored by a measuring system and guaranteed to a precision of 0.1 mm.
The powerful processors constantly measure the torque and, if the torque is exceeded, the cutting process is stopped within fractions of a second. This prevents drill breakages even with the smallest threads of M 0.8.
The Gewindequick’s drive unit is a synchronous servo motor that guarantees smooth running over a wide speed range. Thread cutting doesn’t get more precise than this.
|Thread sizes||M 0.5 – M 4||M 0.8 – M 6||M 2 – M 10|
|Torque range||0.03 – 0.80 Nm (infinitely variable)||0.1 – 2.5 Nm (infinitely variable)||0.3 – 8.4 Nm (infinitely variable)|
|Speeds||50 – 3.000 U/min (infinitely variable)||100 – 3.000 U/min (infinitely variable)||100 – 2.400 U/min (infinitely variable)|
|Mains- / power consumption||230 V / 620 W||230 V / 620 W||230 V / 620 W|
|Safety regulations||CE-/EMC-compliant IP 54||CE-/EMC-compliant IP 54||CE-/EMC-compliant IP 54|
|Tool holder||Collet chuck holder ER11||Quick-change system B10 / Gr. 0 quick-change chuck||Quick-change system B12 / Gr. 1 quick-change chuck|
|Spindle stroke / thread depth||60 mm / 50 mm||85 mm / 75 mm||85 mm / 75 mm|
|Height adjustment / swivelling range||Manual with hand crank / ± 90°||Manual with hand crank / ± 90°||Manual with hand crank / ± 90°|
|Overhang (spindle-column spacing)||230 mm||230 mm||250 mm|
|Distance tool holder – machine table||0 – 300 mm||0 – 300 mm||0 – 300 mm|
|Table size / clamping surface||375 x 280 mm / 200 x 200 mm||375 x 280 mm/ 200 x 200 mm||375 x 280 mm/ 200 x 200 mm|
|Drive||Synchronous servo motor||Synchronous servo motor||Synchronous servo motor|
|Depth precision||0.1 mm||0.1 mm||0.1 mm|
|Display||4.3“ colour display||4.3“ colour display||4.3“ colour display|
|Machine dimensions (W x D x H)||280 x 440 x 690 mm||280 x 440 x 690 mm||280 x 440 x 690 mm|
|Control unit dimensions (W x D x H)||400 x 300 x 120 mm||400 x 300 x 120 mm||400 x 300 x 120 mm|
|Machine weight||53 kg||54 kg||56 kg|
Tapping of male and female threads, both for thread cutting and for thread forming. Can be used flexibly as a bench-top machine, both for single item production and in series production.